Pushtotalk - Push To Talk; Ramp - Ramp Gain Adjustment; Redial - Redial The Last Number; Refsel - Reference Select For Pa Adaptation & Aec - ClearOne CONVERGE PRO 880 Manual De Instalación Y Funcionamiento

pUshToTalK – Push to Talk
This command selects/reports the setting of push-to-talk for a microphone.
Command Form: DEVICE pUshToTalK <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
Ramp – Ramp Gain Adjustment
This command starts / stops the gain ramp for an input, output or assignable processing block. There is no query
associated with this command.
Command Form: DEVICE Ramp <Channel> <Group> <rate> [Target]
argument Type
Channel Channel
Group Group
rate Signed integer
Target Signed integer
Redial – Redial the Last Number
This command redials the last number. There is no query for this command.
Command Form: DEVICE Redial <Channel>
argument Type
Channel Channel
Group Group
reserved
ReFsel – Reference Select for PA Adaptation & AEC
This command selects/reports which output or expansion bus reference is used for a mic input as a reference for
power amp adaptation mode and acoustic echo cancellation where applicable.
Command Form: DEVICE ReFsel <Channel> [ref. Group ref. Channel]
argument
Channel
Group
reference Group
reference Channel
ReFseT – Reference Channel Set Up
This command selects/reports the output the reference channel tracks.
Command Form: DEVICE ReFseT <Channel> [reference output]
argument
Channel
236 Technical Services: 800-283-5936
size values
1 See Groups and channels
1 3 (m)
2 0 = off
1 = on
2 = Toggle
(null to query in text)
size values
1 See Groups and channels
1 1, 2, 3, 5, 7, 12, 16, 17 (i, o, m, p , l, F, T, r)
1 -50 – 50
if value=0, the ramp will stop.
if value< 0, the gain will ramp down.
if value>0, the gain will ramp up.
1 -65 – 20
if null in text or 0x80 in binary, the ramp will use
the channel's maximum and minimum for a target.
size values
1 See Groups and channels
1 17 (r)
2 0
Type size values
Channel 1 See 3 (m) in Groups and channels
Group 1 3 (m)
Group 1 2, 8, 20 (o, A, B)
Channel 1 See Groups and channels
(null to query in text)
Type size
Channel 1
values
See Groups and channels
Units
Units
dB / s
dB
Units
Units
Units