Reset - Reset; Ring - Ring Indication; Ringeren - Audible Ring Enable; Ringerlvl - Audible Ring Level - ClearOne CONVERGE PRO 880 Manual De Instalación Y Funcionamiento

Group Group
Value reference output 2
ReseT – Reset
resets the unit. There is no query for this command.
Command Form: DEVICE ReseT
no arguments
RinG – Ring Indication
This command indicates a ringing line. This command is reportable only. it cannot be queried or set.
Command Form: DEVICE RinG <Channel><Value>
argument Type
Channel Channel
Group Group
Value unsigned
integer
RinGeRen – Audible Ring Enable
This command sends/reports the use of an audible ring.
Command Form: DEVICE RinGeRen <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
RinGeRlvl – Audible Ring Level
This command selects/reports the audible ring's level.
Command Form: DEVICE RinGeRlvl <Channel> [Value]
argument Type
Channel Channel
Group Group
Value Signed Float
RinGeRsel – Audible Ring Melody Selection
This command sends/reports the audible ring melody.
Command Form: DEVICE RinGeRsel <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
1 20 (B)
0 = none
See 2 (o) in Groups and channels
(null to query in text)
size values
1 See Groups and channels
1 17 (r)
2 0 = ring Cycle ended
1 = ring Cycle Started
size values
1 See Groups and channels
1 17 (r)
2 0 = off
1 = on
2 = Toggle
(null to query in text)
size values
1 See Groups and channels
1 17 (r)
2 -12.00 – 12.00 (dB)
(null to query in text)
size values
1 See Groups and channels
1 17 (r)
2 1 – 3
(null to query in text)
Units
Units
Units
Units
Appendix A: Serial Commands 237