Cd Operations; Playing A Cd - JVC KD-AR800 Manual De Instrucciones

Refer to "MP3/WMA OPERATIONS" on pages 18
to 22 for operating MP3/WMA discs.

Playing a CD

1
Open the control panel.
Note on One-Touch Operation:
When a CD is already in the loading slot,
pressing CD/CD-CH LINE (for KD-AR800) or
CD/CD-CH (for KD-G800) or CD (for
KD-G700) turns on the unit and starts playback
automatically.
2
Insert a CD into the loading slot.
All tracks will be played repeatedly until you
stop playback.
The unit draws the CD,
the control panel goes
back to the previous
position (see page 32),
and playback starts
automatically.

CD OPERATIONS

The display changes to show the following:
CD indicator
Total playing time
of the inserted disc
Elapsed playing time
* When "CLOCK DISP" is set to "CLK DISP ON"
(see page 28), the current indication will soon
change to the clock time.
Notes:
• When a CD is inserted upside down, the control
panel moves down, the CD automatically ejects
from the loading slot. The source changes to the
previously selected source.
• If there is no CD in the loading slot, you cannot
select CD as the source.
• If the current disc is a CD Text, disc title/performer
and then track title will automatically appear.
Current source
indication*
Total track number
of the inserted disc
Current track
number
13