Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the
TVsource (broadcast or cable).
Setting the Signal Source
1
Press the
MENU button.
Press the ENTER
2
Press the
or
button.
ENTER
Press the
or
ENTER
button.
•
When you connect equipment to the TV, you can choose between the
following sets of jacks: "AV1", "S-Video1", "Component1", "Component2",
"PC", "HDMI1", or "HDMI2" on the TV's rear panel, and "AV2", or
"S-Video2" on the TV's side panel.
Alternate method
Press the SOURCE button on the remote control
repeatedly to select an external signal source.
Only connected devices can be selected.
Before selecting an input source, make sure the corresponding external device is connected first.
HDMI input can be selected only when the external device is turned on and connected to the TV.
English-32
button to select "Input".
button to select "Source List", then press the
button to select a signal source, then press the