Initializing the Picture Settings
You can replace all picture settings with the factory default values.
1
Press the
SOURCE button to select "PC".
2
Press the
MENU button. Press the
then press the ENTER
3
Press the
or
4
Press the
or
button. The picture settings are replaced with the factory
ENTER
default values.
Select "Return" by pressing the
ENTER
button to return to the previous menu.
Press the EXIT button to exit.
English-82
or
button to select "Setup",
button.
button to select "PC", then press the
button to select "Image Reset", then press the
or
button, then press the
ENTER
button.