Mode Button; Sleep Function - Daikin Siesta ARCWB Manual De Instrucciones

1.1

MODE Button

Press the MODE button to switch operation from COOL, HEAT*, AUTO*, DRY*, FAN. Check the
display to see in which mode the control is set. *HEAT, AUTO and DRY are available for selected
models only.
1.2 TURBO Fan Speed
Press the TURBO key once to activate Turbo fan speed. Turbo symbol will be shown. To disable Turbo
fan speed and back to previous fan speed, press the Turbo key once again. If user presses the FAN
button or QUIET button or turn off the unit, the turbo speed will be disabled. This speed is only valid
during COOL and HEAT mode for selected models.
1.3 Automatic air swing
• Press the SWING
• To distribute the air to a specific direction, press the SWING
move to the desired direction and press the button once again.
Swing mode selection method (for cassette E model)
• Press SWING ( ) button for 4 seconds to enter field setting mode. While in field setting mode, it
will only show SWING MODE (
• Press temperature
Swing Mode 3.
• There are 3 different SWING MODE, which are:
Swing mode 1
SWING MODE will not activate unless SWING is activated.
Swing is indicated by the logo:
• If no mode changes within 4 seconds, unit will operate according to the selected SWING MODE (
1.4 QUIET Fan Speed
Press the QUIET key once to activate Quiet fan speed. QUIET symbol will be shown. To disable Quiet
fan speed and back to previous fan speed, press the QUIET key again. If user presses the FAN button
or TURBO button or turn off the unit, the quiet speed will be disabled. This speed is only valid during
COOL and HEAT mode for selected models.
1.5 " " or " " Set Temperature Button
Press the temperature button and set the temperature of your choice by pressing " " or " " button
once, temperature changes by 1°C or 1°F. The default temperature setting range is from 16°C to 30°C
(60°F to 86°F). When the Option 20 - 30ºC is set, the temperature range limit is set to 20ºC to 30ºC
(68°F to 86°F). Pressing both keys simultaneously will toggle the temperature setting between ºC
and ºF. No temperature setting is allowed during FAN mode (No set temp display). There is no room
temperature display.
1.6

SLEEP Function

Press the SLEEP button to activate the sleep mode. SLEEP function is not available in DRY mode
and FAN mode.
1.7 "ON TIMER" and "OFF TIMER"
The unit has 2-event timer, namely Timer 1 and Timer 2, each event has an ON TIMER and an OFF
TIMER. The key press activity for Timer ON and Timer OFF is shown on Table 1.1
OPERATING INSTRUCTION
button to activate the automatic air swing function.
).
and button to select SWING MODE (
Swing mode 2 Swing mode 3
button and wait until the louver
) rotation from Swing Mode 1 to
1
).