SOMFY Home Keeper Guía Rápida página 15

8
Fixing a movement detector
All Somfy movement detectors detect any movement and any
temperature variation caused by a moving body (human or
animal) or by a heat source (radiator, convection heater, fireplace,
robotic vacuum cleaner, etc.).
10 m
1 2
2.30 m
90°
4
10
Fixing the sirens
1
2000m
11
It is essential to customise
the installer code
The installer code enables you to access the menu used to make the
Home Keeper system settings.
1. To access the settings menus
Press OFF + 1111 (factory user code 1).
Press the key , enter the installer code
(factory code: 2222).
2. To change the installer code
Enter the number 1 3 0 0
of the required
menu +
OK.
Enter the new
2 1 4 8
code. This must be
between 0001 and
9998
13
It is essential to set the date and time
1. Setting the date
3 1 OK.
0 6 0 1 2 0 1 8 OK.
Ø 6 mm
< 1s
2 mn
2
Ø 6 mm
3
OK. The factory installer
2222 ➜ ➜
code 2222 is
displayed.
The new installer
OK. 2148
➜ ➜
code, 2148, is stored
(for example)
Date: 01/01/2010
The new date is
06/01/2018
➜ ➜
stored (for example)
9
Fixing a Home Keeper LCD keypad
1
3
2
Ø 6 mm
1
3
12
It is essential to customise
user codes 1 and 2
User codes 1 and 2 are used to arm or disarm the system, to
customise the user and installer codes, to store 2 phone numbers, 2
SMS numbers and automatic devices.
1. To access the settings menus
Press OFF + 1111 (factory user code 1).
Press the key
< 1s
(factory code: 1111).
2. To change the user code 1
Enter the number
of the required
menu +
OK.
Enter the new
code. This must be
between 0001 and
9998
2. Setting the time
1.50 m
3
HAUT - TOP
70 mm
BAS - DOWN - -
2
, enter the user code 1
1 0 1 0 OK.
4 0 0 1 OK.
3 2 OK. Heure: 12h00
0 8 5 0 OK. 08h50
Ø 6 mm
4
CLIC!
< 1s
The factory user
1111 ➜ ➜
code 1111 is
displayed
The new user code,
4001
➜ ➜
4001, is stored (for
example)
The new time is
➜ ➜
stored (for example)