Freezing The Current Picture - Samsung HP-T4254 Manual Del Usuario

Changing the Position of the PIP Window
4 Press the ▲ or ▼ button to select Position, then press the ENTER button.
Press the ▲ or ▼ button to select the desired PIP window position, then press
the ENTER button.
➢ In Double Window (
be selected.
➢ If the PIP window is set to Double Window (
mode, the screen size or alignment may slightly differ depending on the
signal type.
Changing the PIP Channel
5 Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button at the bottom of the remote to select the desired
channel in the PIP window, then press the ENTER button.
➢ The channel can be active when the sub picture is set to TV.
Press the EXIT button to exit.
and
Press the PIP CH
channel.

Freezing the Current Picture

1 Press the STILL button to freeze a moving picture.
Normal sound will still be heard. Press again to cancel.
➢
To prevent screen burn-in, this function will automatically cancel after 5
➢
minutes.
) and Double Wide (
CH and buttons on the remote control to change the PIP
English - 33
) modes, Position cannot
) or Double Wide ( )
RETURN
FAV.CH