Picture Control
Using Automatic Picture Settings
Your TV has three automatic picture settings ("Dynamic", "Standard", and "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, or Movie by making a selection from the menu.
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
2
Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select the Dynamic, Standard, or Movie picture
setting, then press the ENTER button.
• Choose Dynamic to increase the clarity and sharpness of the picture.
• Choose Standard for general TV watching mode.
• Choose Movie when watching movies.
Press the P.MODE button on the remote control to select one of the standard picture
settings.
3
Press the ▲ or ▼ button to select Contrast, Brightness, Sharpness, Color,
or Tint, then press the ENTER button.
4
Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
➢
• Tint doesn't operate in PC mode.
• In PC mode, only the Contrast and Brightness can be selected.
• Each adjusted setting will be stored separately according to its input mode.
• When you make changes to Contrast, Brightness, Sharpness, Color, or
Tint. OSD color will also be adjusted accordingly.
Continued...
English - 26
RETURN
FAV.CH