Picture Menu; Changing The Preset Picture Mode; Adjusting Picture Settings - Samsung 4+ Serie Manual De Usuario

Common Interface
O MENUm → Broadcasting → Common Interface →
ENTERE
• CI Menu: This enables the user to select from the CAM-
provided menu. Select the CI Menu based on the menu
PC Card.
• CAM video transcoding: You can configure the setting
to transcode the video codec from the CAM automatically.
Turn it Off if you do not want to use it.
✎
You must use a CAM that supports transcoding the
video codec.
• Application Info: View information on the CAM inserted
into the CI slot and on the "CI or CI+ CARD" which is
inserted into the CAM. You can install the CAM anytime
whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or
by phone.
2. Firmly insert the "CI or CI+ CARD" into the CAM in
the direction of the arrow.
3. Insert the CAM with the "CI or CI+ CARD" into the
common interface slot, in the direction of the arrow so
that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal
channel.

Picture Menu

Changing the Preset Picture Mode

¦
Picture Mode t
O MENUm → Picture → Picture Mode → ENTERE
Select your preferred picture type.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Movie: Suitable for watching movies in a dark room.
[PF4000-SH]BN68-04821H-03Cover.indb 15

Adjusting Picture Settings

¦
Cell Light / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎
NOTE
• In analogue TV, Ext., AV modes of the PAL system,
the Tint (G/R) function is not available.
• Settings can be adjusted and stored for each external
device connected to the TV.
• Lowering picture brightness reduces power
consumption.
Picture Size
O MENUm → Picture → Picture Size → ENTERE
Set the various picture options such as picture size and aspect
ratio.
✎
The available items may differ depending on the selected
mode.
✎
Depending on the input source, the picture size options
may vary.
• Picture Size t: Your cable box/satellite receiver
may have its own set of screen sizes as well. However, we
highly recommend you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the picture size to the
16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
✎
Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the
screen size.
✎
Adjusts the Zoom or Position by using ▲, ▼ button.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre of
the screen may cause image retention (screen burn)
which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component (1080i /
1080p) signals are inputted.
15
English
2013-07-25 10:44:11