Humidifying Filter And Tray - Sharp UA-HG60E Operación Manual

HUMIDIFYING FILTER AND TRAY

HOW TO REMOVE THE
HUMIDIFYING FILTER AND
TRAY.
HOW TO ATTACH THE
HUMIDIFYING FILTER AND
TRAY.
After maintenance, correctly
reattach the parts.
Humidifying Filter
Rinse with plenty of water.
NOTE
If you remove the Humidifying Filter shaft,
be sure to reattach it to its original position.
2
1
NOTE
How to clean hard to remove dirt.
Kitchen detergent
(only Humidifying tray)
1. Fill the tray half-way with water.
1
2. Add a small amount of kitchen
detergent.
Soak for 30 min-
2
utes.
3
1
2
Gray
Click
Citric acid
(available at some drugstores)
2 1/2 cups of
water
Rinse off the kitchen detergent or the descaling solution with clean water.
White
Humidifying Tray
1
Remove the Humidifying Tray Cover.
2
Rinse with plenty of water.
3
Reattach the Humidifying Tray Cover.
•
Do not remove the Float and the Tray Panel. If they
come off, refer to E-15.
3 cups of
water
3 teaspoons
E-14
2
1
Tray Cover
2 1
Click
1
2
100% bottled lemon juice
with no pulp
1/4 cup
Soak for 30 minutes.
(When using lemon juice as your
descaling solution, allow for more
soak time.)