CARE AND MAINTENANCE
HUMIDIFYING TRAY AND COVER
Float
Roller
BACK PANEL
Sensor
Back Panel
Rinse the inside of the Humidifying Tray with a
toothbrush.
CAUTION
• Do not remove the Float and the Roller.
• If the Float and / or the Roller comes off . (Ref. E-18)
for stubborn dirt...
NOTE
TRAY
Gently remove dust with a vacuum cleaner
attachment or similar tool.
for stubborn dirt...
NOTE
E-14
1. Fill the tray half way with water.
2. Add a small amount of kitchen
detergent.
3. Soak for 30 minutes.
4. Remove the kitchen detergent
with clean water.
1. Soak in water with kitchen
detergent about 10 minutes.
CAUTION
DO NOT scrub the back panel
hard.
2. Remove the kitchen detergent
with clean water.
3. Dry fi lter completely in a well
ventilated area.