Intended Use; General Safety Instructions - SATA Filter 400 Instrucciones De Servicio

<< Operating instructions SATA filter 400 >>
4. Technical Design of the Filters [1]
[1-1] Air inlet G ½ i
[1-2] Mounting bracket (not vis-
ible)
[1-3] Pressure gauge
[1-4] Pressure regulation valve
[1-5] Pressure adjustment knob
[1-6] Ball valves with air outlet G
¼ a
[1-7] Adhesive sticker for filter
maintenance of "fine filter"
- blue -
[1-8] Filter housing, filter stage B
and C
5.

Intended Use

The SATA filters 400 have been developed to purify technical compressed
air. They separate solid, liquid and partly gaseous particles from the com-
pressed air streaming through the filter.
6. Safety Instructions

6.1. General Safety Instructions

• Before using the filters, please read the safety and operating instruc-
tions completely and carefully. Safety instructions and specified steps
are mandatory.
• Keep all enclosed documents and pass on the filter together with
these documents only.
6.2. Filter specific safety instructions
• Local safety, accident prevention, work and environment protection
regulations are mandatory!
• Use, cleaning and maintenance by skilled personnel only!
[1-9] Integrated automatic con-
[1-10] Condensate outlet hose (not
[1-11] Adhesive sticker for filter
[1-12] Filter housing, filter stage A
[1-13] Adhesive sticker for filter
Warning! Attention!
Warning! Attention!
densate drain valve
visible)
maintenance of "sintered
filter" - yellow -
maintenance of "activated
charcoal filter" - black -
EN
VII.3