Publicidad
Produktgruppe 512
15 von 60
Note
The kit, Mat. no. 04451340 for PW 610x, PW 613x, PW 616x and PW 620x, also contains the following:
1 pipe 173 x 40
2 bends 70 x 87 PP
1 branch piece 70 x 50 x 87, DIN 19560
1 connection stub
1 collar DIN 4060, HTGM 40/50 C
1 branch piece
1 ring
1 connection stub
2 hose clips SGL 70 - 90
1 branch piece 70 x 50 x 87, DIN 19560
1 pipe DIN 19560 50 x 40
1 bend 70 x 87 PP
8 hoses 1 1/4" 32 x 5.5
1 wiring harness - Water recycling
1 terminal strip, 6-pole
1 sticker 1 - 6,10 x 68
2 raised-head self-tapping screws 3.5 x 11
1 accessory - Information sheet
1 accessory - Installation
1 initial kit for water recycling
1 hose sub-assembly WRG 02
These fitting instructions - Connection for water recycling
List of illustrations (PW 610x, PW 613x, PW 616x, PW 620x):
Fig. 1: Mixer box cover plate removal
Fig. 2: Drain hose disconnection from mixer box
Fig. 3: Water recycling intake on mixer box
Fig. 4: Drilling out water recycling intake on mixer box
Fig. 5: Water recycling intake viewed from liquid dispensing cover plate
Fig. 6: Water recycling intake
Fig. 7: Mixer box cover plate fitting
List of illustrations (PW 6241, PW 6321):
Fig. 8: Connection hose pre-assembly
Fig. 9: Suds container preparation
Fig. 10: Connection hose fitting
Fig. 11: Angle connector fastening and holder
Fig. 12: Connection hose fastening
Fig. 13: Mixer box cover plate in fitted position
List of illustrations (WS 5101, WS 5141, WS 5191, WS 5240, WS 5320):
Fig. 14: Connection hose pre-assembly
Fig. 15: Fitting in the machine
Fig. 16: Intake hose - WS 5101, WS 5141
List of illustrations (WRG 02 water recycling system fitting):
Fig. 17: Mounting bracket
Fig. 18: Tank fitting
Fig. 19: Tank with angled hoses
Fig. 20: Filter unit assembly
Fig. 21: Hose connections
16.12.2011
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
M.-Nr. 04598534
Publicidad
