Before First Use
• Before the first use, please take out all accessories from the package and read this Manual carefully. Pay parti-
cular attention to operational instructions and cautions to avoid any injury or property damage.
• Prior to each use, inspect to make sure the seal and anti-block shield are mounted in the lid. After use, remove
any foreign object from the seal and anti-block shield.
• Keep clean to avoid odors.
• Never pull the seal by force, as pull deformation may affect sealing and pressure effect. A damaged seal should
not be used, and the unit shall be sent to the service center for replacement.
Getting Started:
Step 1: Remove the foil of the front panel
Step 2: Remove the transport safety sticker from the valve (page 8 number 3)
Step 3: Insert the condensation collector (page 8 "Condensation Collector")
Step 4: Plug in the power cord (page 8 number 13)
Step 5: Make sure the anti-block shield is correctly assembled (page 8 number 15)
Step 6: Insert the stainless-steel removable cooking pot into multi pot (page 8 number 7)
It is recommended to boil water before the first-time usage of the product to get a better understanding on how
the device works.
1. Make sure the stainless-steel removable cooking pot is in the multi pot located
2. Fill 6 cups of water or until the 2 QT line is reached in the removable cooking pot and put the lid on top. Close
the lid fully in a counter-clockwise direction.
3. Turn the valve towards "seal" indication (page 8 number 3)
4. Press Soup/Broth button on the front panel (page 8 number 8) and wait a few minutes until the circular motion
LED turns into a zero.
5. Press the Instant Pressure Release Button (page 8 number 1) for a few seconds to release the first hot steam.
6. After the steam is getting less intensive turn the valve (page 8 number 3) to the release indication.
7. Switch off the device by pressing Cancel and then wait until it has cooled off.
8. Your souspreme multi pot is now ready to use
Before First Use
7