Lamp Replacement - König Electronic DL-QUAKE250 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
Value#
60-69
70-79
80-89
90-99
100-109
110-119
120-127
128-183
184-239
240-244
245-249
250-255
CH 3 GOBO
Value#
0-1
2-127
128-255
CH 4 Prism Motor Rotate
Value#
0
1-63
64-127
128-239
240-244
245-249
250-255
Note: In DMX mode and SLAVE mode, the lamp will be blacked out automatically if there is no DMX
signal input.
SERVICE:
There are no user serviceable parts inside except the lamp. Refer all service to a qualified technician.

Lamp replacement:

1. Disconnect the fixture from AC power and allow it to cool for 15 minutes.
2. Loosen the access screws and lift the cover.
3. Remove the base of the old lamp from the socket.
4. Install the new lamp: ELC 24V/250W GX5.3 halogen.
Push the lamp base pins fully, but gently, into the socket.
To ensure maximum lamp life, avoid touching the lamp with bare hands.
DL-QUAKE250_A5.indd 5
Function
GOBO6
GOBO7
GOBO8
GOBO9
GOBO10
GOBO11
GOBO12
CW
FAST TO SLOW
CCW SLOW TO FAST
Sound triggering Fast mode
Sound triggering Slow mode
Sound triggering Standard speed mode
Function
No function
GOBO Dimmer, SLOW TO FAST
GOBO Shaking, SLOW TO FAST
Function
No function
FAST TO SLOW
SLOW TO FAST
Dimmer, SLOW TO FAST
Sound triggering Fast mode
Sound triggering Slow mode
Sound triggering Standard speed mode
5
2009.9.1 9:33:30 AM

Publicidad

Tabla de contenido
loading

Tabla de contenido