Temperature Unit Setting; Battery Replacement - TFA Dostmann 60.2542 Instrucciones De Uso

TFA_No. 60.2542_Anleitung
Radio-controlled alarm clock
• Confirm the setting with the ALARM ON/OFF button.
• Set the minutes in the same way.
• Confirm the setting with the ALARM ON/OFF button.
8.1.2.1 Activate and deactivate the alarm
• To activate or deactivate the alarm function press the
ALARM ON/OFF button in normal mode.
• The alarm symbol appears/disappears on the display.
• When the adjusted alarm time is reached, the alarm rings.
• Press any button (except SNOOZE/LIGHT) and the alarm will
stop.
• If the alarm is not stopped manually, the ascending alarm
tone automatically turns off after two minutes and will be
reactivated at the same set time on the following day.
• The alarm symbol remains on the display.
• When the alarm rings, press the SNOOZE/LIGHT button and
the snooze function is activated.
• Once the snooze function is activated, the snooze symbol
will be flashing on the display.
• The alarm will be interrupted for 5 minutes.
30
29.08.2017 13:37 Uhr Seite 16
Radio-controlled alarm clock

8.1.3 Temperature unit setting

• Press the▼ button in normal mode to change between °C
(Celsius) or °F (Fahrenheit) as temperature units.
9. Backlight
• Press the SNOOZE/LIGHT button.
• The backlight turns on for 5 seconds.
10. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents
or scouring agents.
• Remove the batteries if the device will not be used for an
extended period of time.
• Keep the device in a dry place.

10.1 Battery replacement

• Change the batteries when the device functions become
weak.
• Open the battery compartment and insert two new AAA 1.5
V batteries, polarity as illustrated.
• Close the battery compartment again.
31