Alarm Time Setting; Battery Replacement - TFA Dostmann MINI CHARGE Instrucciones De Uso

TFA_No. 60.2020_Anleitung 17.10.2017 10:13 Uhr
MINI CHARGE – Digital alarm clock with USB charging function

7.1.3 Alarm time setting

• Press the ALARM button in normal mode to enter the alarm mode 1.
• The alarm symbol, ALARM 1 (OFF or ON) and 6:30 (default) or the last adjusted alarm time appear on the display.
• Press and hold ALARM button for 3 seconds.
• The hour digit starts to flash.
• Press the + or – button to adjust the hours.
• Press the ALARM button again and you can adjust the minutes with the + or - button.
• Press the ALARM button again and TYPE appears on the display.
• Press + or – button to adjust the desired alarm mode (SINGLE, MON-FRI or WEEKEND).
• Press the ALARM button to return to normal mode.
• The corresponding alarm symbol will appear on the display next to the current time display. The alarm function is activated.
SINGLE MON-FRI WEEKEND
• Press the ALARM button twice in normal mode to enter the alarm mode 2.
• The alarm symbol, ALARM 2 (OFF or ON) and 7:30 (default) or the last adjusted alarm time appear on the display.
• Set the alarm time for the second alarm in the same way as the first alarm time.
• When the adjusted alarm time is reached, the alarm rings.
• The alarm symbol flashes.
• Press any button (except LIGHT/SNOOZE) and the alarm will stop.
• GOOD MORNING appears on the display.
• If the alarm is not stopped manually, the ascending alarm tone automatically turns off after two minutes and the alarm will be reactivated at
the same set time on the following day.
• The alarm symbol remains on the display.
• When the alarm rings, press the LIGHT/SNOOZE button and the snooze function is activated.
• SNOOZE and 10 min. (default) or the last adjusted snooze interval appear on the display.
• The alarm will be interrupted for the specified period and the time display counts down the seconds.
• Press any button (except LIGHT/SNOOZE) and the snooze function will stop.
• To activate/turn off the alarm function, press the ALARM button in normal mode to choose alarm time 1 or 2.
16
Seite 9
MINI CHARGE – Digital alarm clock with USB charging function
• Press the SET button to activate or deactivate the alarm. ON or OFF appears on the display.
• Press the ALARM button. The alarm symbol will appear or disappear besides the current time display.
7.1.3 NAP function setting
• Press and hold the NAP button in normal mode for three seconds, to enter the setting mode.
• NAP and 10 minutes (default) or the last nap time flashes.
• Press the + or – button to set the desired time duration in steps of 5 minutes (5 to 120 minutes).
• Confirm the setting with the NAP button.
• Once the setting is confirmed, the NAP function is activated and the time display counts down the seconds.
• An alarm tone will sound when the set minutes expire.
• NAP 00m 00 will be flashing on the display.
• Press any button and the nap function will stop.
• To activate the nap function with the last adjusted nap time just press the NAP button in normal mode..
8. Charging function
• Attention: The charging function only works with the power adapter. Plug the USB cable into one of the two USB ports on the alarm clock
and connect the other end to your mobile device. Make sure that the charging rate (1 Amp / 2 Amp) is suitable for your mobile device.
• HELLO is displayed shortly after a successful connection and the charging function starts.
• Depending on which USB port you have chosen, a battery icon will be displayed next to the USB 1 or USB 2 icon and the charge symbol
flashes.
• When the mobile device is fully charged, the charge icon will appear filled. (On some devices, the charge icon will disappear)
9. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries if the device will not be used for an extended period of time.
• Keep the device in a dry place.

9.1 Battery replacement

• Change the batteries when the battery symbol appears on the display (in battery operation only).
• Open the battery compartment and insert three new AAA 1.5 V batteries.
• Close the battery compartment again.
17