Nevir NVR-6041 MDG25 Manual De Instrucciones página 25

Countertop Installation
Remove all packing material and
accessories. Examine the oven for any
damage such as dents or broken door. Do
not install if oven is damaged.
Installation
1. Select a level surface that provide enough open space for the intake and/or outlet vents.
a. The minimum installation height is 85cm.
b. The rear surface of appliance shall be
placed against a wall. Leave a minimum
clearance of 30cm above the oven, a
minimum clearance of 20cm is required
between the oven and any adjacent walls.
WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If
installed near or over a heat source, the oven could be damaged and the
warranty would be void.
The accessible surface may be hot during operation.
OPERATION
1. Power Level
Level 10
Power 100%
Display PL10
11 power levels are available.
2. Clock Setting
(1) Press " CLOCK/KITCHEN TIMER "once, "00:00" will display.
(2) Press the number keys and enter the current time. For example, time is 12:10 now, please
press "1,2,1,0" in turn.
(3) Press " CLOCK/KITCHEN TIMER " to finish clock setting. ":" will flash and the clock will be
lighted.
(4) If the numbers input are not within the range of 1:00--12:59, the setting will be invalid until valid
numbers are input.
9 8 7 6
90% 80% 70% 60%
PL9 PL8 PL7 PL6
Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
Do not remove the light brown Mica cover
that is attached to the oven cavity to
protect the magnetron.
c. Do not remove the legs from the bottom of
the oven.
d. Blocking the intake and/or outlet openings
can damage the oven.
e. Place the oven as far away from radios
and TV as possible. Operation of
microwave oven may cause interference
to your radio or TV reception.
2. Plug your oven into a standard household
outlet. Be sure the voltage and the
frequency is the same as the voltage and
the frequency on the rating label.
5 4 3
50% 40% 30%
PL5 PL4 PL3
2 1 0
20% 10% 0%
PL2 PL1 PL0
25