Victron energy BlueSolar MPPT 150/85 Manual Del Usuario página 14

5. MORE INFORMATION ABOUT THE LCD SCREENS
5.1 Scrolling through the LCD screens
The following information will be displayed if the "-" button is pressed (in order of
appearance):
Displayed info
Battery charge current (1)
Battery voltage (1)
Battery charge power
Battery temperature (2)
Charger temperature (2)
Panel current
Panel voltage
Panel power
Warning message (3)
Error message (3)
HUB-1 operation (3)
BMS operation (3)
Table 4: scrolling through the LCD screens
1) The system voltage is shown in the first two segments.
2) A valid temperature is shown, --- = no sensor information or Err = invalid sensor data.
3) These items are only visible when relevant.
Pressing the "-" button or the "+"button for 4 seconds activates the auto-scroll-mode.
Now all LCD-screens will pop-up one by one with short intervals.
The auto-scroll-mode can be stopped by pressing the "-" or the "+" button shortly.
14
Icons Segments
 .
 .
.
.,,
.,,
.
.
.
 
 


Units
A
V
W
°C/°F
°C/°F
A
V
W