B) Assembling The Sausage Attachment; C) Assembling The Kubbe Attachment; D) Assembling The Biscuit Pastry Attachments - Silvercrest SFW 250 A1 Instrucciones De Uso

• The assembled meat grinder
to the motor block
- Insert the meat grinder casing
r
block , such that the arrow on the feeding
shaft lies against the symbol
r
block . The locking button presses itself in
(Fig. ).
- Lightly press the meat grinder casing
at the same time turn the feeding shaft on the
meat grinder casing
(Fig. ), so that the arrow on the feeding shaft
lies against the symbol
t
grinder casing
springs out.
- Finally place the feed tray
feeding funnel.
- To dismantle it, press the locking button and
turn the feeding funnel to the right (Fig.
You can now pull the meat grinder casing

b) Assembling the sausage attachment

Unfold the fold-out side. There you will find the
step-by-step illustrations for assembling the appliance.
• Remove the meat grinder casing
under a).
• Disassemble any attachments that might be fitted
and clean the meat grinder casing
Note:
i
The cross blade with the spring
red for the sausage attachment
move them both from the meat grinder casing
• Coat all metal parts with cooking oil.
• Take the sausage disc
partment on the top of the appliance (Fig.
• Position the sausage disc
tions in the sausage disc
points in the meat grinder casing
• Then place the sausage attachment
d
the sausage disc
• Screw the ring clamp
t
is connected
r
by a bayonet connector:
t
into the motor
on the motor
t
t
into the middle position
. When the meat
engages, the locking button
e
on top of the
t
t
as described
t
.
u
is not requi-
s
! If need be, re-
d
from the small com-
d
so that the indenta-
d
lie on the fixing
t
.
s
before
.
a
on hand-tight.
• Assemble the meat grinder casing
under a).

c) Assembling the kubbe attachment

Unfold the fold-out side. There you will find the
step-by-step illustrations for assembling the appliance.
• Disassemble the meat grinder casing
in and scribed under a).
• Disassemble any attachments that might be fitted
and clean the meat grinder casing
Note:
The cross blade
red for the Kubbe attachment
ve them both from the meat grinder casing
• Coat all metal parts with cooking oil.
) . • Insert both plastic parts of the Kubbe attachment
f
out. so that the indentations on the Kubbe attach-
f
ment
der casing
• When everything has been correctly assembled,
screw the ring clamp
• Assemble the meat grinder casing
under a).
d) Assembling the biscuit pastry
attachments
Unfold the fold-out side. There you will find the
step-by-step illustrations for assembling the appliance.
• Remove the meat grinder casing
t
. under a).
• Disassemble any attachments that might be fitted
and clean the meat grinder casing
Note:
).
The cross blade
red for the biscuit attachment
ve them both from the meat grinder casing
• Coat all metal parts with cooking oil.
• Remove the pattern strips
biscuit attachment
- 34 -
i
with the spring
f
! If need be, remo-
lie on the fixing points in the meat grin-
t
.
a
on until it is handtight.
i
with the spring
q
! If need be, remo-
q
from the front of the
q
.
t
as described
t as de-
t
.
u
is not requi-
t
.
t
as described
t
as described
t
.
u
is not requi-
t
.