Original Operating Manual 1 Symbols; Machine Features; Intended Use; Technical Data - Festool CARVEX Serie Manual De Instrucciones

CARVEX
GB
Original operating manual
1 Symbols..................................
2 Machine features......................
3 Intended use ...........................
4 Technical data..........................
5 Safety instructions....................
6 Operation ................................
7 Settings ..................................
8 Working with the machine .........
9 Service and maintenance ..........
10 Accessories .............................
11 Disposal ..................................
12 Warranty.................................
13 EU Declaration of Conformity .....
The specified illustrations appear at the begin-
ning of the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear a dust mask.
Wear ear protection.
Wear protective goggles.
4

Technical data

Jigsaws
Power
Stroke speed
Stroke length
Pendulum stroke
max. inclination (only with accessory
angle table WT-PS 400)
max. cutting depth (depending on saw blade)
14
14
14
14
14
15
16
16
18
18
18
20
20
20
(110 V version)
1500 - 3800 rpm
Wood
Aluminium
Wear protective gloves.
Do not throw in the household waste.
2

Machine features

[1-1] Chip guard
[1-2] On/Off switch
[1-3] Variable speed trigger (only PSB 400
EBQ)
[1-4] Switch lock (only PSB 400 EBQ)
[1-5] Adjusting wheel for stroke speed
control
[1-6] Swivel plug-it connection (only PS
400 EBQ)
[1-7] Mains power cable
[1-8] Extractor connector
[1-9] Saw table change lever
[1-10] Saw blade ejection
[1-11] Replaceable saw table
[1-12] Pendulum stroke switch
[1-13] Base runner
3

Intended use

Jigsaws are designed for sawing wood and
similar materials similar to wood. With the
special saw blades offered by Festool, these
machines can also be used for sawing plastic,
steel, aluminium, non-ferrous metal and ce-
ramic plates.
The user bears the responsibility for
damage and accidents caused by im-
proper use.
PS 400 EBQ
500 W
400 W
26 mm
4 steps
45° to both sides
120 mm
20 mm
PSB 400 EBQ
1000 - 3800 rpm