Disposal; Warranty; Eu Declaration Of Conformity - Festool CARVEX Serie Manual De Instrucciones

CARVEX
GB
X
Set the pendulum stroke
X Set the stroke rate
L Store the centring mandrel in the depot
[10-3].
Semi-stationary sawing with the Festool
CMS system
When combined with the Festool CMS system,
the jigsaw becomes a semi-stationary bench
saw for profiled cuts. See the CMS brochure
for more information.
X
Install your jigsaw with adaptation table in
the CMS as described in the operating man-
ual for the CMS-PS.
11

Disposal

Do not throw the power tool in your household
waste! Dispose of machines, accessories and
packaging at an environmentally responsible
recycling centre. Observe the valid national
regulations.
EU only: European Directive 2002/96/EC stip-
ulates that used electric power tools must be
collected separately and disposed of at an en-
vironmentally responsible recycling centre.
12

Warranty

We offer a warranty for material and produc-
tion defects for all our tools in accordance with
the locally applicable legal provisions, but for
a minimum of 12 months. Within the EU mem-
ber states, the warranty period is 24 months
(verification through invoice or delivery note).
Damage caused by the operator, natural wear,
overloading, incorrect handling or through the
use of the equipment not specified in the op-
erating manual, or damage which was known
at the time of purchase, is not covered by the
warranty. Furthermore, damage caused by the
use of non-original accessories and consum-
able materials (e.g. sanding pads) is also ex-
cluded.
Complaints can only be accepted if the tool is
returned while still assembled to the supplier
or an authorised Festool Customer Service
workshop. Keep the operating manual, safety
instructions, spare parts list and purchase re-
ceipt in a safe place. Otherwise the current
warranty conditions of the manufacturer shall
apply.
Note
Due to continuous research and development
work, we reserve the right to make changes to
the technical content of this documentation.
20
[1-12] to 0 - 1.
[1-5] to 1 - 5.
13

EU Declaration of Conformity

Jigsaw
PSB 400 EBQ
PS 400 EBQ
Year of CE mark: 2010
We declare under sole responsibility that this
product complies with the following directives
and standards:
2006/42/EC, 2004/108/EC, EN 60745-1, EN
60745-2-11, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
08.02.2010
REACh for Festool products, its accesso-
ries and consumable materials:
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream us-
ers" and product manufacturers, we are aware
of our duty to provide our customers with in-
formation. We have set up the following web-
site to keep you updated with all the latest
news and provide you with information on all
the materials used in our existing products:
www.festool.com/reach
Serial no.
496057, 496065
496056, 496064