Tabla de contenido
Publicidad
32.
In case the power supply is cut off from the
appliance it is necessary to wait about 5 minutes
before reconnecting the appliance to the electricity
in order to avoid damage to the appliance.
33.
Do not expose the device to rain.
Failure
to
follow
safety
recommendations
instructions may result in serious injuries or death!
TECHNICAL DATA
Product name
Freezer
Model
RCFZ-355
Rated input power [W]
210
Rated current [A]
1,41
Power consumption [kWh/24h]
2,63
Power supply [V]/Frequency [Hz]
230~/50
Refrigerant/Refrigerant Amount
R290/103g
Temperature [°C]
-18~-25
Net volume [l]
355
Electric shock protection class
I
Emitted noise level [dB]
51
AEC (Annual Energy
960
Consumption) [kWh/year]
Climate class
ST
Weight [kg]
66
Basket/shelves
4 baskets
Lock
yes
SCOPE OF THE APPLICATION
The freezer is designed for storing and freezing food.
The user is liable for any damage resulting from
nonintended use of the device!
BERORE THE FIRST USE
Upon receipt of the goods, check the packaging for
defects and open the packaging if there are no damages.
If the packaging is damaged, please contact your transport
company and distributor within 3 days, and document the
damages as detailed as possible. Do not turn the package
upside down! When transporting the package, please
ensure that it is kept horizontal and stable.
DISPOSING OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic
tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate
condition!
GENERAL HINTS FOR THE USER
The appliance must be cleaned after unpacking and before
its connection to the power supply network. Once the
freezer has reached the set temperature, it can be filled
with. It is forbidden to fill the freezer with warm liquids and
food and any food products put into the appliance should
be covered.
8
Food products and drinks should be stored in sealed
airtight containers. In order to ensure adequate air
circulation inside the appliance it is recommended to
place products be in such a manner in order to maintain
distance between them. If the door is opened too often,
and
there is increased energy consumption, which could lead
to possible damage.
Always close the door of the appliance when it is not in use.
Do not use screwdrivers or other metal tools in order
to remove ice layers that are formed on the walls of the
appliance during its use.
After closing the cover, do not open it again suddenly and
with use of force, the gasket located around the closure
of the appliance chamber can hinder to open it for about
1 or 2 minutes. After this time, the appliance should open
normally.
In case of you do not use the appliance for a longer time,
in order to save electricity, it is necessary to disconnect the
cleaned appliance from the electricity, to clean and leave
the door open in order to prevent gathering of unpleasant
odours inside the appliance.
DEVICE DESCRIPTION
RCFZ-355
2
3
5
1
7
8
9
6
4
Device elements:
1.
Housing
2.
Glass doors
3.
Storage basket
4.
Thermostat knob
5.
Compressor grille
6.
Power cable
7.
Internal light On/Off switch
8.
Power light
9.
Temperature indicator
INSTALLATION AND ASSEMBLY OF THE APPLIANCE
Care must be taken so that the appliance will be in an
upright position at least 3 hours before its first activation.
CAUTION! Correct connection of the device to the single
socket with earth is the guarantee of
proper work. In the case of inappropriate installation, the
machine may cause injury.
Place the appliance on a flat, stable surface that will
withstand its weight together with its contents.
In order to provide adequate ventilation, keep at least 10
cm of space between the appliance and the wall or other
objects.
First start up.
1.
Unpack the whole appliance.
2.
Make sure that no packing material has been left in
the compressor chamber.
Rev. 11.01.2018
3.
Remove all documents and other accessories from
the inside of the appliance.
4.
Secure the device by placing wheel chocks against its
wheels and/or engaging the device locks to prevent
wheels from spinning.
5.
Install all additional components of the appliance.
6.
Clean and dry the interior
7.
Close the cover / door of the appliance.
8.
Connect the appliance plug to the socket.
9.
Set the optimal refrigeration power.
10.
Wait for the device to attain the required
temperature.
11.
Insert frozen products into the frezer.
12.
If you need to freeze fresh food, it is necessary
to follow the instructions for freezing fresh food
contained in this document.
Do not store any glass bottles with liquids, because
they increase their volume during freezing and may be
damaged. Never store explosive substances in the freezer.
The appliance is equipped with a lock which enables to
protect the freezer against opening (key in the set).
VERWENDUNG DES SCHLOSSES
USING THE LOCK
To prevent unauthorized opening the device doors may be
locked.
Follow these steps to lock the doors:
1.
Set the key with the latch to the open position (A) by
rotating anticlockwise.
2.
Insert the key with the latch (A) into the lock (B) and
turn clockwise (C).
3.
Remove the key (D), the latch will remain in the lock
preventing the sliding doors from being opened.
B
A
C
D
FREEZING OF FRESH FOOD
1.
Place the packaged fresh food in the freezer,
payingattention so that it will not come in direct
contact
withalready
frozen
products
because
they may defrostand shorten their shelf-life. It is
recommended thatfresh food will be placed near the
wall or bottom ofthe freezer, in these places it is the
coldest.
2.
Increase refrigeration power for 4 – 6 hours.
3.
After 24 hours it is necessary to change the location
of the frozen food so that it will be possible to freeze
other products
4.
Set the cooling power which will be appropriate for
filling of the freezer.
SWITCHING ON THE APPLIANCE
1.
Close the appliance door.
2.
Connect the appliance plug to the power supply. The
appliance will start normal operation and the power
light will switch on but the cooling will start only
after setting a cooling power other than 0. (Setting
cooling power to 0 stops the cooling process, but it
does not turn off the appliance).
Rev. 11.01.2018
If the device is disconnected from its power source, the
power source was cut off or if it was switched off, wait
3-5 min before turning on again. Otherwise the device
will fail to start. In the event of a power cut, wait at least 5
minutes before reconnecting the device in order to prevent
damaging the compressor or other elements.
DESCRIPTION OF THE CONTROL PANEL
RCFZ-355
1
2
3
4
1.
Internal light On/Off switch
2.
Green light – indicates connection to a power source
and that the device is on.
3.
Temperature indicator.
4.
Refrigeration / thermostat adjustment knob (0 – no
refrigeration; 1 – slight refrigeration; 7 – maximum
refrigeration).
SELECTION OF TEMPERATURE SETTINGS
In order to turn on: turn the temperature adjustment knob
on the right to the level (other than 0) which is required:
•
minimum (light cooling)
•
maximum (lowest temperature)
The temperature should be set depending on:
•
ambient temperature
•
quantity of stored food
•
opening frequency
Adjustment guidelines:
•
It is recommended to reduce the refrigeration setting
in summer and increase it in winter (depending on
ambient temperatures).
•
A large quantity of food will reduce refrigeration
effectiveness.
•
If more refrigeration is required, increase it a step
at a time and wait a few hours for the temperature
to stabilise.
•
After loading the device with large quantities of fresh
food, increase refrigeration for approximately 4-6
hours and then reduce it to its optimal level.
MAXIMUM FILLING HEIGHT OF THE FREEZER
Never fill the freezer until the edge being in contact with
the cover. Always keep the distance between the cover and
the frozen products.
Set the temperature adjustment knob depending on the
filling of the freezer.
DEFROSTING
Under normal conditions of use (3-4 openings per day), the
freezer should be defrosted once or twice a year (in case
of more frequent opening the freezer should be defrosted
more often).
The appliance must be defrosted especially when the
thickness of the ice layer on its walls will be about 5-7 mm.
Ice layers on the internal walls of the appliance reduce
its efficiency. Layers of ice can be scraped with a plastic
scraper. Do not use metal things to scrap ice from the
appliance.
9
Publicidad
Tabla de contenido
