Installing Batteries; Setting Date And Time - Topcom BD-4601 Manual De Usuario

BD-4601 (BPM Arm 1500)
8

Installing batteries

CAUTION
Failure to use batteries according to instructions can be hazardous.
• Always use Alkaline batteries of the same type.
• Ensure that batteries are installed with correct polarity. Damage to the batteries and
the equipment can result from installation with incorrect polarity.
• Never toss batteries into a fire, due to the risk of explosion.
• Never allow battery terminals to come into contact with each other or with metal
objects, either intentionally or accidentally. This can cause overheating, fire or
explosion.
• Keep batteries out of the reach of children. Consult a doctor immediately in case of
swallowing.
• Fluid from leaking batteries can cause permanent damage to the equipment. Take
particular care when handling damaged or leaking batteries, due to the risk of
corrosion. Wear safety gloves.
• Remove the batteries if the equipment will not be used for an extended period.
• Open the battery compartment by pulling the cover away on the bottom
of the unit.
• Insert 4 AAA Alkaline batteries. Follow the polarity as indicated in the
battery compartment.
When the batteries are low,
must be replaced.
9

Setting date and time

8
is displayed. Low batteries
To adjust the date and time:
• Press the mode button
memory zone will be displayed.
• Press the set button
• Press the mode button
year.
• Press the set button
will blink on the display.
• Change the month, day, hours and minutes as described
above, using the mode button
button to confirm every setting.
3
• After setting the minutes, the device is ready to use.
to activate the display. The
4
, the year will blink on the display.
3
successively to change the
4
to confirm the year. The month
3
to change and the set
4
1 x A AA
+
-
1 x AAA A
1 x A AA