Control Elements - Gemini GX Serie Manual De Instrucciones

INTRODUCTION
Congratulations on your purchase of a Gemini GX Series loudspeaker. Your product is backed by a 1 year limited warranty. With proper care and
maintenance your speaker will provide you with years of reliable service. Please register your product online at WWW.GEMNIDJ.COM or by using
the included form at the end of this manual.
1. All operating instructions should be read before using this equipment.
CAUTIONS:
2. To reduce the risk of electrical shock , do not open the unit .
there are NO USER OR SERVICABLE PARTS INSIDE please refer
servicing to a qualified Gemini Sound Products service technician.

CONTROL ELEMENTS

( ( P P O O W W E E R R E E D D S S P P E E A A K K E E R R S S ) )
FUSE HOLDER/VOLTAGE SELECTOR and MAIN POWER CONNECTOR. Please make sure that your local
1
voltage matches the voltage indicated on the unit, before you attempt to connect and operate your GX SERIES
loudspeaker. Blown fuses may only be replaced by fuses of the same type and rating.
Use the POWER switch to put your GX SERIES loudspeaker into operation.
2
MAIN INPUT. These XLR connectors (GX-801 and 1001) and XLR, 1/4" and RCA connectors (GX-1201 and
3
1501) are the inputs for the signal source. The GX-801 allows you to choose what input type the XLR will be,
simply by using Switch
input. The GX-1001 has separate XLR inputs for MIC and LINE and are adjustable individually. The GX-1201
and 1501 as well as having individual balanced XLR inputs for both MIC and LINE they also have UNBAL-
ANCED 1/4" input for MIC and UNBALANCED RCA inputs for LINE level input.
AUX INPUT The GX-801 has an UNBALANCED RCA AUX INPUT and the volume is controlled by the master
4
volume. The GX-1001/1201 and 1501) have both BALANCED (XLR) and UNBALANCED (RCA) and allow
you to connect an auxiliary input source, if both MAIN INPUT and AUX INPUT are connected simultaneously
both inputs will be heard.
LINE OUTPUT is directly connected to the input and or inputs of the GX SERIES loudspeaker and provides a
5
one-to-one copy of the input signal, for example, to loop the input through to the input of another device
(e.g. a second GX SERIES loudspeaker).
6
POWER and CLIP LED The POWER LED will illuminate when the system is in operation. The CLIP LED will
illuminate when the system is overloading, running your GX SERIES loudspeaker at CLIP levels is not recom-
mended and will cause the internal amplifier to fail and or the MAIN POWER FUSE to blow.
7
The VOLUME level governs the overall volume level of you GX SERIES loudspeaker.
The MIC GAIN/LEVEL rotary governs the GAIN (GX-801) and or LEVEL (GX-1001,1201 and 1501) of the
8
MICROPHONE INPUT.
9
The LINE LEVEL rotary adjust the volume of the INPUT and AUX INPUT Channels (GX-1001,1201 and 1501).
TONE/EQ (BASS and TREBLE) CONTROLS TONE (GX-801) will adjust the overall treble output of the
10
GX-801 by turning to the left you will hear less high end frequencies and by turning the rotary to the right you
will hear more high end frequencies.
EQ (BASS and TREBLE) (GX-1001,1201 and 1501) The (TREBLE) rotary will adjust the high end frequencies
and the (BASS) rotary will adjust the low end frequencies of the overall output of the GX SERIES loudspeaker.
MIC/LINE SWITCH (GX-801 only) you can choose weather the XLR input of the GX-801 will be a LINE LEVEL
11
input or a MICROPHONE input. NOTE: USING THIS INPUT WITH A LINE LEVEL SOURCE WHILE
SWITCHED TO THE MIC POSITION MAY CAUSE THE SPEAKER TO OVERLOAD!.
( ( P P A A S S S S I I V V E E S S P P E E A A K K E E R R S S ) )
For the GX-800, 1000, 1200 and 1500 use a SPEAKON™ cable from your amplifiers speaker output to the
12
SPEAKON™ input jack.
GX SERIES
you can choose weather the XLR input is a LINE level input or a MICROPHONE
11
In the USA: If you experiance
problems with this unit, please call
1(732) 346 0061 for Gemni Customer
Service. Do not attempt to return this
dealer
equipment to your
4