Battery Level; Light Control - Gemini MPA-3600 Manual Del Usuario

1. POWER
Use this button to turn the POWER ON/OFF.
2. CHARGE
When charging, the green light will be on.
When fully charged, the green light will be off
3.

BATTERY LEVEL

Indicates the status of the battery, there are 4 indicators. 1-4 represents 20% 50% 80%
100% status. When the battery is fully charged, 2, 3 and 4 green lights will be on. As the
power decreases, the indicator lights will be off one by one from grid 4 to grid 1.
When the power is low to grid 1, the red indicator lights will be on, indicating low
battery. The unit needs to be charged.
4. CHANNEL GAIN VOLUME KNOB
Use this knob to adjust the CH1/CH2 volume output
5. MIC/LINE/ INSTRUMENT SWITCH BUTTON
The switch button of MIC/LINE/ INSTRUMENT input
6. AUX OUT
3.5mm Aux output - Unbalanced RCA connector for AUX audio output
7.

LIGHT CONTROL

Light Mode- Press this button to select Light Mode
Mode 1: The light changes color at random.
Mode 2: The light will stay one color, change the color by pressing Light
COLOR button.
Mode 3: The light will change color to the beat of the music.
Mode 4: The light will flash with a color, change the color by pressing Light
COLOR button.
Mode 5: The light is off.
8.
Bluetooth
Short Press to enter BT Play or Pause Mode
Long Press to exit BT Paring Mode
9.
AUX IN
3.5mm AUX Input
10.
TONE
TREBLE Knob - Use this knob to adjust the sound quality in treble when MIC/
LINE input.
BASS Knob- Use this knob to adjust the sound quality in bass when MIC/LINE
input.
11.
BT/AUX LEVEL
Use this knob to adjust the BT/AUX volume output
MASTER VOLUME
Use this knob to adjust the MASTER volume output
12.
AC IN
100V-240V 50Hz-60Hz
13.
STANDBY
If no signal is played for more than 20 minutes, it will enter standby mode.
Short press Bluetooth button can wake up the unit.
5