Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
UNIVERSAL REMOTE CONTROL
FOR AIR CONDITIONER
RM-505
V0.0 0617m
CONTROLS
iCOOL
Smart cooling
iHEAT
Smart heating
POWER
Turn on
TEMP +
Increase temperature
TEMP-
Decrease temperature
MODE
Change mode (Automatic, cooling, dry, airing or heating)
SWING
Swing mode (automatic / manual)
DIR
Operation mode of vents
FAN
Vents intensity
TIME+ / TIME-
Adjust time
TIMER ON
Timer for automatic turn on
TIMER OFF
Timer for automatic turn off
CLOCK
Display and set the current time
ENTER
Confirm
SELECT
Enter a code
SMART COOLING AND HEATING
This function is to select the temperature with a single button.
Press the
"iCOOL"
or
"iHEAT"
button to enter to the smart mode of temperature selection. The air conditioner will
heat or cool until it reaches a comfortable temperature.
If you want to adjust the temperature manually, use
ADJUSTING TIME
1
Press "CLOCK". The hour will begin flashes on the display.
2
"TIME +"
"TIME-"
Use
and
to adjust hour per minute.
3
Press
"CLOCK"
again to end settings (If you do not press this button, the time on the display will stop flashes
after 5 seconds).
TIMER FOR AUTOMATIC TURN ON
With the remote control turn off:
1
"TIMER ON"
Press the
button. The time will flash on the display and will appear the
2
Use
"TIME +"
and
"TIME-"
to adjust the time in what you want to will turn on the air conditioner automatically.
The time will stop flashes after 5 seconds. The display will show the current time and this symbol
TIMER FOR AUTOMATIC TURN OFF
With the remote control turn on:
1
Press the
"TIMER OFF"
button. The time will flash on the display and will appear the
2
Use
"TIME +"
and
"TIME-"
to adjust the time in what you want to will turn on the air conditioner automatically.
The time will stop flashes after 5 seconds. The display will show the current time and this symbol
NOTES:
If you press twice"TIMER ON" or "TIMER OFF" will cancel the timer.
When you have finished setting timer, make sure that the remote control is directed to the air conditioner, otherwise the
timer will not work.
If you want to display the timer, press TIMER ON / OFF. The display will show the programmed time for 5 seconds
SPECIFICATIONS
Product design and specifications may change without previous notice.
Input: 3 V - - - (2 x AAA)
POWER
.COOL
.HEAT
MODE
SWING
1
2
FAN
TIME +
4
5
TIMER ON
TIMER OFF
ON
OFF
7
8
SELECT
S
0
"TEMP+"
and "TEMP-".
IMPORTANT
Read these manual to avoid any damage.
The instructions of these manual are for reference about the product.
There may be differences due to update.
Please check our web site www.steren.com to obtain the latest version of the instruction manual.
CAUTIONS
• Do not try to open the device, it may cause malfunction and void the warranty.
• Do not expose the device to extreme temperatures.
• Avoid dropping the device as it may be damaged.
• Be sure to insert the positive (+) and negative (-) ends of the batteries in the correct directions.
• Remove the batteries when not in use for an extended period of time.
• Do not use old or new batteries of different types at the same time.
MANUAL CONFIGURATION (BY BRAND)
1
In the table,search and identify the code according to the brand of the device. If there are several codes,
choose the first one ..
2
On the control, press "SELECT". The digits will flash on the display. Enter the selected code. Una vez
completado el código, se guardará automáticamente y el control estará listo para utilizarse.
3
Turn on the air conditioner and press the keys on the control; In case that the functions do not respond
correctly, try another code.
TEMP +
AUTOMATIC CONFIGURATION
If you do not know the air conditioner brand or do not find it in the table, follow these steps:
DIR
3
1
Point the remote control towards the air conditioner. Press and hold the
6
remote control will enter search mode, the screen will change the code automatically.
CLOCK
9
ENTER
OK
2
Wait until the air conditioner responds and press any key to confirm.
3
Test the device, in case that the functions do not respond correctly, repeat the process.
CODES TABLE
BRAND
icon
icon
"SELECT"
BRAND
CODE
button for 5 seconds. The
CODE
Publicidad
