Selecting The Menu Language - Sony VPL-PHZ12 Manual De Referencia

Selecting the Menu Language

The factory setting for the language for displaying menus, messages, etc. is English.
To change the on-screen language, proceed as follows:
1
Plug the AC power cord into a wall outlet.
2
Turn on the projector.
Press the   key on the main unit or the  key
/
on the Remote Commander.
3
Press the MENU key to display the menu.
If the display cannot be properly seen, adjust
the focus, size, and position of the projected
image (page 42).
4
Select the menu language.
Press the  or  key to select the Operation

( ) menu then press the ENTER key.
Press the  or  key to select "Language

( )" then press the ENTER key.
Press the /// key to select a

language, then press the ENTER key.
5
Press the MENU key to turn off the menu
screen.
3
1
2
39
GB
Preparing