Safety Instructions; Work Area Safety; Electrical Safety; Personal Safety - Hilti SIW 22T-A Manual De Instrucciones

Battery
Battery capa-
city
Weight
Temperature
monitoring
during char-
ging
Temperature
monitoring
during dis-
charging
Type of cell
No. of cells
Energy con-
tent

5 Safety instructions

NOTE
The safety rules given in the following section contain all general
safety rules for power tools which, in accordance with the applic-
able standards, require to be listed in the operating instructions.
Accordingly, some of the rules listed may not be relevant to this
tool.
5.1 General power tool safety warnings
a)
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
instructions for future reference. The term "power tool" in
the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.

5.1.1 Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.

5.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.

5.1.3 Personal safety

a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs, al-
Printed: 29.11.2013 | Doc-Nr: PUB / 5070698 / 000 / 03
B 22/3.3
Li­Ion
3.3 Ah
0.78 kg
Yes
Yes
Li­Ion
12
71.28 Wh
B 22/2.6
Li­Ion
2.6 Ah
0.78 kg
Yes
Yes
Li­Ion
12
56.16 Wh
Save all warnings and
B 22/1.6
Li­Ion
1.6 Ah
0.48 kg
Yes
Yes
Li­Ion
6
34.56 Wh
19
en