Repair, Maintenance And Storage - Stiga RC 685 Manual De Instrucciones

h) Before cleaning, repair or checking the machine, the operator must shut off the engine and ensure
all moving parts are in a stationary state!
i) Engine's emission is hazardous, so never try to run it indoors!
j) Never operate the tiller without proper protection equipment, guard or other protection devices in
place!
k) When the machine is running, always keep it away from children and pets!
l) Never overload the machine with a big tilling depth and a high speed!
m) The machine is not allowed to run at a high speed on a slippery road. Watch back to
take care when driving backward!
n) Never allow any looker-on to approach a running machine!
o) Only the accessory devices and equipment (like the counter weight) allowed by the
manufacturer of the tiller may be used
p) Never try to operate the tiller when the view is limited or lighting conditions are poor!
q) Take care when tilling a hard field, because the blades may hook into the ground, hence
pushing the tiller forward. If such a result does occur, just let free the handle and don't try to
control the machine!
r) Never operate the tiller on an abrupt slope!
s) Take care not to let the machine turn over when it is ascending or descending a slope!

4. Repair, maintenance and storage

a) Keep the machine, accessory devices and equipment, including the battery, in a safe
working condition. Whenever possible, detach the battery before storage to prevent freezing,
and charge it to some extent when it is necessary to do so.
b) Check whether bolts under shear stress, mounting bolts of engine and other bolts are
tightened properly at a fixed interval, so as to ensure the machine can work safely.
c) The machine shall be stored indoors and away from flames, and cool the engine before
storing it.
d) If the tiller is to be stored for a long time, the manual shall always be kept as an important
material.
e) Don't repair the machine at will unless you have the proper tools and the manual to instruct
disassembling, assembling and repairing of the machine.
2