Printer Parts; Dip Switch Tables - Epson TM-U295 Manual Del Usuario

Printer Parts

2
POWER switch
1
document table

DIP Switch Tables

Serial interface
SW Function
1 Data receive error
2 Receive buffer
3 Handshaking
4 Data word length
5 Parity check
6 Parity selection
7, 8 Transmission speed 
(See Serial transmision speed table.)
9 Pin 6 reset
10 Pin 25 reset
TM-U295/U295P Specifications
Printing method
Printing direction
Characters per line 
(default)
Character matrix
Character size
Number of characters
Print speed
Paper feed speed
Line spacing (default)
Paper types
Paper size
Total thickness
2
4
printer cover
3
upper case
ON OFF
Ignored Prints "?"
35 bytes 512 bytes
XON/XOFF DTR/DSR
7 bits 8 bits
Yes No
Even Odd
Used Not used
Used Not used
Impact dot matrix, 7-pin shuttle type
Unidirectional
5  7 font: 35; 7  7 font: 42
5  7 with 1-dot spacing (normal dots)
7  7 with 3-dot spacing (half dots)
5  7 font: 1.6  2.9 mm {0.063  0.114"}
7  7 font: 1.3  2.9 mm {0.051  0.114"}
Alphanumeric characters: 95; International characters: 32
Extended graphics: 128 4
1.9 to 2.3/lines/sec. (both 5  7 and 7  7 fonts)
Approx. 12.5 lines/second (52.9 mm/second {2.1"/second})
4.23 mm {1/6"}
Normal, pressure-sensitive, and carbon-copy
80 69 mm {3.15  2.72"} (W  L) to182  257 mm {7.17  10.12"} (W  L)
Single-ply: 0.09 to 0.25 mm {0.0035 to 0.0098"}
Copy paper: 0.09 to 0.35 mm {0.0035 to 0.0138"}
5
Serial transmission speed
8 7 Transmission speed
ON ON 1200 bps
ON OFF 2400 bps
OFF ON 4800 bps
OFF OFF 9600 bps
Parallel interface
SW Function ON
1 Auto line feed Enabled
2 Receive buffer 35 bytes
3~9 Undefined —
10 Internal use Fixed to ON
control panel
OFF
Disabled
512 bytes
—