Equalizer Curve Fine Adjustment - Pioneer MEH-P5150 Manual De Operación

Equalizer Curve Fine Adjustment

You can adjust the center frequency and the Q factor (curve characteristics) of each cur-
rently selected curve band (EQ-LOW/MID/HIGH). Adjusted equalizer curve settings are
memorized in "CUSTOM".
Level (dB)
Center frequency
1. Press the AUDIO button for 2 seconds to select Equalizer Curve Fine
Adjustment.
2. Press the AUDIO button to
select the desired band for
adjustment.
3. Select the desired frequency
with the 2/3 buttons.
LOW: 40 + = 80 + = 100 + = 160 (Hz)
200 + = 500 + = 1K + = 2K (Hz)
MID:
HIGH: 3K + = 8K + = 10K + = 12K (Hz)
4. Select the desired Q factor with
the 5/∞ buttons.
2N + = 1N + = 1W + = 2W
Note:
• If you make adjustments when a curve other than "CUSTOM" is selected, the newly adjusted curve
will replace the previous adjusted curve. Then a new curve with "CUSTOM" appears on the display
while selecting the equalizer curve. (Refer to page 24.)
Q=2W
Q=2N
Frequency (Hz)
27 26