Using the appliance
5.2
Display
No. in fig. 3,
page 4
1
2
3
4
5
6
7
8
9
6
Using the appliance
6.1
Before first use
➤ Before first use or storing plug the battery pack into the wall charger until it is fully
charged.
➤ Observe the information given in chapter "Charging the lithium iron phosphate
battery pack" on page 11.
10
Description
A failure occurred (chapter "Troubleshooting" on page 13).
!
See chapter "Troubleshooting" on page 13.
See chapter "Troubleshooting" on page 13.
The battery pack supplies energy to an USB device.
The battery pack supplies energy to a device connected to
the 2-PIN output.
The battery pack supplies energy to a device connected to
the DC output.
State of charge as a percentage
Battery is being discharged
Battery is being charged
Battery is being charged and discharged at the same time
See chapter "Troubleshooting" on page 13.
PLB40
EN