Date/Time Setting; Alarm Setting - Panacom PA-7600 Manual Del Usuario

At off hook state, press SET key to enter the setting state, LCD dis-
plays SET 12345678, press the digit key or UP/DOWN key to choose
the setting function, and LCD displays the corresponding setting
option, after finish setting, press DEL key to the upper menu and
digit or UP/DOWN to choose the next setting option.(If use the UP/
DOWN key to the setting option, you should enter the sub-menu first
and then press the UP/DOWN key to choose the setting option, do
as follows: Press SET key and then press the UP/DOWN key. Here
we just introduce to use the digit key to choose the setting option).
Here is the detail step:

4.1.1 Date/Time Setting

Press SET key and choose 1, LCD displays 1—DATE、2—CL. Choose
1 enter to datesetting, the digit
will flash, input the digit directly then press SET key to confirm; Af-
ter finish date setting, LCD will change the weekday automatically.
Choose 2 enter to time setting, it is the same to the date setting.
Press HF key to exit the setting state.
4.1.2 Ring select and volume adjust
Press SET key and choose 2, LCD displays r 1t 2vip 3vol, choose 1
enter to the normal ring select,LCD displays ring type 01, then press
UP/DOWN key to select the ring sound, press SET key to confirm,
press DEL key to the upper menu; Choose 2 enter to VIP ring select,
LCD displays ring vip 01, the set method is same to the normal ring
select; Choose 3 enter to ring volume adjust setting, LCD displays
ring vol 04, Press UP/DOWN key to select, press HF key to exit.

4.1.3 Alarm setting

Press SET key and choose 3, LCD displays AL 1-2-3, choose 1 enter
to the first group alarm setting,LCDdisplays ALAROFF, the OFF flashes,
then input the alarm time and press SET key toconfirm,When to close the
alarm, press the SET key and the group of the alarm and then press UP/
DOWN key to choose the OFF; The other two group setting are same to
the first one; The first one alarms only one time,the other two alarm every-
day, press any key will stop alarm during alarming.
4.1.4 No-disturb time setting
Press SET key and choose 4, LCD displays off_r 00-00, input digit
Pg. 5