Panacom PA-7600 Manual Del Usuario página 7

code means it is successfully stored the numbers.Choose 3 enter to
manual IP2 setting, it is the same to the manual IP1 setting.
4.2 On hook function operate
4.2.1 Back dial
At pre-dial or incoming call check or outgoings check state, press
the BACK key will dial out the selected numbers; Press DIAL key for
3 seconds will add "0" before the dial numbers.
4.2.2 Incoming call check
At on hook or off hook state, press UP/DOWN key can view the in-
coming call information; Press # key for 3 seconds will enter to the
incoming call check state fast at on hook state.
4.2.3 Outgoing check
At on hook or off hook state, press CHECKEXCHANGE key enter to
outgoing check state, press UP/DOWN key can view the outgoing
information; Press * key for 3 seconds will enter to the outgoing
check state fast at on hook state.
4.2.4 On hook pre-dial
At on hook state, input the outgoing numbers, use DEL key to delete
the wrong dialed number, pick up or press BACK key will dial out the
numbers when finish inputting the dial numbers (At Hand Free
state, it will auto-RD when the line is busy), press BACK key for 3
seconds will auto add "0" then back all.
4.2.5 DEL function
At input digit state, use DEL key to delete the wrong input number;
At incoming call check or outgoing check state, use DEL key can
delete the information, press DEL key for 3 seconds can delete all
the information.
4.2.6 VIP memory
Press UP/DOWN key to get the incoming call information, press
VOLkey will store the numbers to VIP or cancel it.
4.3 Off hook function operate
4.3.1 AUTO_RD
Pg. 7