Panacom PA-7600 Manual Del Usuario página 6

time(00-99)when flashes, press SET key to confirm. When No-dis-
turb function set, LCD displays the no disturb time and count down
to 00-00 then it will auto exit the no-disturb state. Pick up or hand
free also can exit the no-disturb state. It doesn't ring during the no-
disturb state.(VIP is allow.)
4.1.5 Special function choose setting
Press SET key and choose 5, LCD displays 1-f 2-pt 3-d, choose 1
enter to flash time setting, LCD displays flash 600 and flashes, press
UP/DOWN key to choose the time. There are 90-95-100-120-180-
300-600-1000ms for selectable; Choose 2 enter to P—T exchange,
LCD displays pt tone, press UP/DWON key to choose the dial mode,
the init value is tone dial mode; Choose 3 enter guard against theft
setting, LCD displays defend off, press UP/DOWN key to choose on/
off state.(The passwords are#).
4.1.6 Local area code and Ex-code setting
Press SET key and choose 6, LCD displays 1-LOC 2-OL,choose1enter
to local area code setting, LCD displays lock, input the digits 1~8 for
selectable, then press SET key to confirm, press DEL key to delete
the input numbers, also press SET key to confirm. Choose 2 enter to
Ex-code setting, LCD displays out off, the setting method is same to
the local area code setting. Press UP/DOWN key to choose OFF to
delete the Ex-code.
4.1.7 LCD light adjust
Press SET key and choose 7, LCD displays LCD con 4, press UP/
DOWN key to adjust light grade, default is the 4th grade, there are 5
grades for selectable.
4.1.8 IP function setting
Press SET key and choose 8, LCD displays 1-au 2-3-ip, choose 1
enter to auto IP setting, LCD displays au IP off, press UP/DOWN
key to choose the IP numbers, IP1, IP2,17909, 17908, 193, 17911,
17921,17931,17951,17991, 068, 96300, 96333, 196, 190,17969,197,
off for selectable, default is off. (IP1,IP2 are manual IP setting mode);
Choose 2 enter manual IP1 setting, LCD displays null, input the
numbers directly and press SET key to confirm, LCD displays ip1
Pg. 6