Inputs And Outputs - Sony BKM-PJ20 Manual De Instrucciones

Available signal system
System
576/50i
480/60i
1)
1080/24p
1)
1080/30p
1)
1080/50i
1080/60i
1)
1080/50p
1080/60p
1)
720/50p
720/60p
1)
Specifications

Inputs and Outputs

3G-SDI/HD-SDI/SDI
(serial digital
component):
Displays the signals inputted to IN terminal in the projector screen.
Inputs signals to IN terminal (serial digital input) and outputs signals from
OUT terminal (display output).
Note
• OUT signal is output when the projector is turned on. It is not output in
standby.
• The OUT signal does not comply with ON-LINE signal specification.
GB
8
SD/HD 3G

–

–


2)


2)


2)


2)
– 
3)

–
3)
 
2)


2)
Compatible also with 1/1.001
1)
frame rate.
Compatible with 4:4:4 YCbCr
2)
10 bit and 4:4:4 RGB 10 bit.
Compatible with 4:2:2 YCbCr
3)
10 bit.
* Not compatible with 3D signals
and audio signals.
The table shows the maximum
number of signals this adaptor can
comply. Not all devices connected
with this adaptor may not display
all signals.
For signal formats this adaptor
can comply, refer to the operating
instructions of the projector used
with this adaptor.