Before First Use - Beper 50.910 Manual De Instrucciones

EN
Rechargeable vacuum cleaner Use instructions

BEFORE FIRST USE

Fig.1F ig.2 Fig.3
Insert the handle (18) into the main body (1) and lock both parts using the retaining screw (5) (Fig.
2).
2. Make sure the dust container (11) and filter assembly (15) are fitted correctly. See "Cleaning dust
container and filters".
3. Insert the head (20) into the suction nozzle and push it inward until you hear a click. To remove it,
press the suction head lock/release button (21) and pull it out. (Fig. 3).
OPERATION
1. To switch the appliance on, slide the on/off switch (3) to the desired position. The LED indicator
will light up in green.
Eco position: Optimum suction power for hard floors with lower noise level. It provides more comfor-
table use and longer battery life.
Turbo: Maximum suction power, suitable for cleaning carpets and rugs.
NOTE: When there is only 4 minutes of battery life left, the LED indicator (2) will light up in red and
flash until the battery dies.
2. When you have finished cleaning, switch the cleaner off by sliding the On/Off switch (3) to the
"O" position.
3. Leave the vacuum cleaner on charge so that it has full power for its next use.
17