Items Supplied And Packaging; Battery Display; Battery Change - Medisana FTD Instrucciones De Manejo

2.1 Items supplied and packaging

Please check first of all that the device is complete and is not damaged
in any way. In case of doubt, do not use the appliance and contact your
supplier or your service centre.
The following parts are included:
1 MEDISANA FTD thermometer, incl. battery
1 Stand
1 Instruction manual
The packaging can be reused or recycled. Please dispose properly of any
packaging material no longer required. If you notice any transport
damage during unpacking, please contact your supplier without delay.
WARNING
Please ensure that the polythene packing is kept
away from the reach of children!
Risk of suffocation!

2.2 Battery display

2.3 Battery change

This thermometer is equipped with a safety catch in order to keep the
battery away from children. Push in the knob for opening the battery
compartment
A 3 V CR2032 lithium battery is required for this thermometer. The
battery must be inserted with the positive terminal (+) on top.
The scope of delivery includes a battery (3 V
CR2032). Remove the safety strip before using for
the first time. A low battery charge is indicated by
the battery symbol
display .
In this case the battery should be replaced as soon
as possible. When the battery capacity has been
used up, the symbol "Lo" appears in the display
as well as the flashing battery symbol
beep is heard (see fig.).
The thermometer can no longer be used without
changing the battery. Press the On/Scan button
to switch off the device.
with a pointed object and remove the battery (Fig.).
2 Start-up
in the lower area of the
GB
and a
15