Measuring Procedure - Medisana FTD Instrucciones De Manejo

Ocultar thumbs Ver también para FTD:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
GB

3 Measuring Procedure

3.1 Notes on temperature measurement
• Do not measure your temperature immediately after eating,
training or bathing. Wait for half an hour.
• Do not take successive measurements at intervals of less than one
minute. If you have to take your temperature at shorter intervals, the
results may fluctuate slightly.
• The human body temperature fluctuates within a natural range.
There is no such thing as a standard body temperature.
• Measure and record your body temperature on normal days. This
will allow you to detect a fever more easily.
• In order to make an accurate measurement in the ear, the sensor
must be directed at the eardrum and be inserted far enough into the
ear canal.
• Some people will have different readings for the right and left ears.
Always measure the same person in the same ear when measuring
temperature changes.
• The measurements can also be influenced by your sleeping position.
If someone has slept on a particular ear for a considerable period, the
temperature will be higher than normal in this ear. In this case,
measure in the other ear or wait for a few minutes before
measuring.
3.2 Taking body temperature measurements
To switch to the mode for taking body temperature measurements,
press the On/Scan button
ear temperature symbol
flash, depending on which measuring method is preset. To change
from the forehead measurement mode to ear measurement mode or
vice-versa, press the On/Scan button
change is confirmed by a beep. When the device is switched on again,
the last measuring mode set (ear or forehead) will be displayed.
3.3 Measuring the temperature in your ear
1. To measure the temperature in your ear, first remove the sensor
cover
2. Press the On/Scan button
18
or the forehead temperature symbol
NOTE
Forehead temperatures should only be taken for
checking purposes, since the skin temperature at
the forehead is easily affected by outside influences,
meaning that the measurement can be falsified.
.
when the device is switched off. Either the
again within 3 seconds. The
.
will

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

99010

Tabla de contenido