Serial Numbers; Cleaning And Maintenance - Peg-Perego seat pop-up Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

fit it accordingly. To lower the footrest push
the two levers downwards and then push
the footrest downwards (fig_a); to raise the
footrest lift it upwards (fig_b).
4 FIVE POINT SAFETY HARNESS: To fasten it,
push the two waist strap buckles (with the
shoulder straps attached – arrow_a) into
the leg divider until they click into place
(arrow_b). To unfasten it, press the round
button in the centre of the buckle (arrow_c)
and pull the waist straps out (arrow_d).
5 To tighten the waist strap, pull on both sides
in the direction of the arrow (arrow_a). To
loosen it, move it in the opposite direction.
6 To adjust the height of the safety harnesses,
release the two buckles on the rear of the
backrest.
Pull the shoulder straps towards you (arrow_a)
until the buckles are released and insert them
in the backrest loops (arrow_b). Remove the
shoulder straps from the sack (arrow_c) and
insert them in the most appropriate loop
(arrow_d), then re-attach the two buckles on
the rear of the backrest (arrow_e) The buckles
are securely attached when a click is heard
(fig_f).
7 HOOD: slide the hood's attachments into the
seat's attachments (fig_a), button the top part
of the hood on both sides of the seat (fig_b),
and finally fasten the sides with the elastics
(fig_c). The hood includes a slot from which
you can hang the child's favourite toy.
To remove the hood: pull out the attachments
and unbutton.
8 To extend the hood, unfasten the Velcro strap
on the rear (fig_a) and let the hood open
completely (fig_b). The hood comes with an
additional sun visor that can be pulled out at
the front (fig_c).
9 FOOT MUFF: Lift the leg rest, slide on the foot
muff and button it below (fig_a); then, slide
the foot muff under the front bar (fig_b).
Unbutton the hood's inside button on both
sides (fig_c) and button up the foot muff
(fig_d).
10 FASTENING THE SEAT TO THE CARRIAGE: Seat
Pop-Up can be secured to the carriage either
facing mom or the street. Place it centrally
on the carriage alongside the symbols (fig_a)
and press downwards with both hands
until it clicks into place (fig_b). To ensure it
is properly secured, grab the seat from the
front bar and pull upwards.
11 RELEASING THE SEAT FROM THE CARRIAGE:
Press the two buttons on the armrests of
the seat (fig_a) and then the two levers
underneath (fig_b); pull up the seat (fig_c)
until it releases. If the backrest is fully
reclined forward (in the closed position,
facing the world), the seat cannot be released
from the chassis (fig_d). In this case, lift
the backrest to the position of use before
releasing the seat from the chassis (fig_e).
12 RAIN COVER: Place the rain canopy over the
seat (fig_a), unbutton the hood's external
button, (fig_b) and secure the rain canopy
(fig_c).
13 Fasten the rain cover by hooking the elastics
to the side buttons on the foot rest of Seat
Pop-Up (fig_a). Rain cover fastened properly
(fig_b).
14 CLOSING THE STROLLER: To close the stroller
with the seat facing the street, press the
backrest adjustment handle (fig_a) and lower
the backrest fully forward (fig_b). To open it,
lift the backrest to the position of use, until
it locks into place (fig_c). To close the stroller
with the seat facing mom, fully recline the
backrest (fig_d).
15 REMOVING THE COVER: unbutton the cover
along the armrests (fig_a) and the backrest
(fig_b), remove the cover from the footrest
(fig_c), unfasten the side elastics (fig_d),
unscrew (fig_e) and remove the harness on
both sides, and finally remove the crotch
strap from above, pushing from under the
seat (fig_f).

SERIAL NUMBERS

16 Seat Pop-Up reports information as at the
date of manufacture of the product.
_ Product name, date of manufacture and serial
number of the seat.
This information is required for any
complaints.
THE ORIGINAL ACCESSORY
PEG PEREGO
Peg Perego accessories are designed as a
useful, practical means of simplifying the
lives of parents. Discover all your product's
accessories on www.pegperego.com

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged and
continuous exposure to bright sunlight may
give rise to colour changes of various different
materials; store this product in a dry place.
CLEANING THE RAIN CANOPY: wash with
a sponge and soapy water; do not use
detergents.
CLEANING FABRIC PARTS: Brush the fabric
parts to remove dust.
• When washing, closely follow the instructions
stated on the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
- 10 -

Publicidad

Tabla de contenido
loading

Tabla de contenido