The following signals are not energy-limited for any of the transmitter models.
Note: These signals are not present on every model. Also, some models may
have one-piece screw terminal blocks and others may have two-piece pluggable
terminal blocks with either screw or spring clip terminals. These terminals will
accept 0.325 to 1.31 mm
FIELDBUS
CONNECTOR
A (Polarity is self-
correcting)
B (Polarity is self-
correcting)
20909-01C Rev 06
2
(22-16 AWG) conductor sizes.
OUTPUT IS LIMITED TO
Isolated and bus powered
Isolated and bus powered
Table 4
Fieldbus Connections
LIMIT INPUT TO
+30VDC, 100mA from bus
+30VDC, 100mA from bus
Page 6-3