Technical Characteristics - Omer Air XII Manual De Instrucciones

TECHNICAL CHARACTERISTICS

-Gun buoyancy neutral with shaft inserted.
-Gun buoyancy positive without the shaft.
-Cylindrical Barrel Ø38 mm made in Anticordal aluminum.
-Removable handle.
-Stainless steel line release on the side (FIG.6B).
-Rotational safety (FIG.6A).
-Piston and bushing + shock absorber made with highly durable techno-
polymers.
-Muzzle with large vent holes (FIG.4).
-Reel attachment system with a special track (FIG.10).
-Engage the safety catch (FIG.6A).
-Take the loader and rest the gun on your thigh (FIG.5) or foot (FIG.5B),
depending on the length. Grip the widest part of the barrel near the muz-
zle.
-Insert the shaft and, using the loader, push down fi rmly on the tip of the
shaft while keeping the shaft aligned with the gun. Push it down until the
SAFETY has been engaged.
WARNING: Be certain that you have securely fastened the piston onto the
sear before letting go of the shaft!
The gun is loaded with an operating pressure of 20 Atm/290PSI, which
can be changed by using the special manual pump to be attached to the
valve (FIG.7),.
To perform this operation, remove the pin (FIG.2A), take off the handle
(FIG.2B) and then connect the pump. Screw it all the way on without for-
cing it (FIG.3).
To obtain the desired pressure level for each model, refer to the number of
necessary pumps, listed in the table at the end of the manual.
To reduce the pressure, push lightly on the valve (FIG.8) with a pin to
release the air slowly.
LOADING THE GUN
BARREL PRESSURE