Care And Maintenance - Omer Air XII Manual De Instrucciones

HOW TO REGULATE THE TRIGGER SENSITIVITY
The gun is manufactured with a standard trigger sensitivity setting, but
over time this setting may change due to the natural settling of the release
mechanism's components.
If it is necessary to change this setting, carefully follow the instructions
below:
WARNING: An overly sensitive setting may cause the shaft to be released
with a minimal amount of pressure on the trigger, and be the cause of ac-
cidents!
Work on an unloaded gun without the shaft (the piston located near the
muzzle and the shaft removed). Underneath the handle you will fi nd a
screw (FIG.9) :
using a hexagon wrench, increase the sensitivity by turning the screw
clockwise, or reduce it by turning counterclockwise.
The reel can be attached through a special track, located underneath the
barrel and in front of the handle (FIG.10).
It is not necessary to remove the handle before the reel can be inserted
into the support track. The reel must be blocked using a special metal rod
that is inserted into the special housing on the track.

CARE AND MAINTENANCE

-Rinse the gun in fresh water after each use.
-Do not place the gun near heat sources and avoid exposure to sunlight.
-Be certain that the spring of the line release mechanism is in perfect
working order, that it maintains the proper tension level and it is properly
positioned.
-It is recommended that you completely discharge the weapon, unscrew
the cap of the muzzle, remove the piston and lubricate the inside the muz-
zle at least once a year using the special grease by Omersub.
-It is recommended that you have your gun serviced every year at an
authorized Omersub Dealer.
ATTACHING THE REEL