Maintenance And Care; Technical Data - HSM 411.2 Instrucciones De Servicio

HSM 411.2

7. Maintenance and care

Cleaning:
• Switch off the shredder, pull out the mains
plug.
• When cleaning only use a soft cloth and a
mild soap-water solution. Never use scou-
ring agents, cleaning fl uid, petroleum or
thinners.

8. Technical Data

Cutting type
Shred size (mm)
Sa fe ty ra ting DIN 32757 – 1
Cutting ca pa ci ty (sheets), DIN A4
Weight
Noise level (Idle running/ load)
Cutting speed
Lo ading width
Voltage
Power for the maximum number of sheets
Dimensions W x D x H (mm)
Volume of shredded material bag
* HSM-specifi cation
Technical and optical modifi cations reserved
0603
Paper shredder
When the cutting capacity drops or
the noise increases:
Strip cut
5.8
2
70 g/m 65 - 67 48 - 50
2
80 g/m 51 - 53 38 - 40
2
74 kg
60 dB(A) / 68 dB(A)
100 mm/s
english
• Lift the inspection door on the
top of the device and spray spe-
cial cutting block oil on the blade
rollers of the cutting device.
• Run cutting system forwards and
backwards several times without
feeding paper. Paper dust and
particles are shaken off.
Cross cut
3.9 3.9 x 50 1.9 x 15 0.78x11
2 3 4
38 - 40 26 - 28
33 - 35 20 - 22
60 dB(A) / 75 dB(A)
400 mm
230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
2100 W
595 x 470 x 990
146 l
1 x 5
5 Level 6*
17 - 19 9 - 10
12 - 14 7 - 8
82 kg
110 mm
13