Machine Components; Safety Instructions - HSM 411.2 Instrucciones De Servicio

HSM 411.2
1. Proper use, warranty
The document shredder is to be used for
shredding paper. Depending on the cutting
type, small quantities of the following materials
can also be destroyed:
Shred size (mm)
Credit cards
CDs
Floppy disks
DAT cassettes
Its sturdy drive mechanism is not damaged
by paper clips and staples. Only on machines
with safety level HS Level 6 (1 x 5 mm) can
the paper not contain staples or paper clips.
We provide a warranty for the device in ac-
cordance with our general sales and delivery
terms. This warranty excludes wear, damage
due to improper handling, natural depreciati-
on, and actions taken by third parties.
2.

Machine components

2
1
11
10
1 Caution label
2 Inspection door
3 Cover
4 Membrane keyboard
5 Mains switch
6 Name plate
7 Caution label
0603
3.9 5.8 1.9x15 3.9x50
● ● ●
● ● ●
● ●
4
12 3
5
6
7
8
9
8 Bottom frame
9 Roller
10 Guide roller
11 Door
12 Paper feed opening
Safety element / slinter protection
Paper shredder

3. Safety instructions

• Read all instructions before start-up of the
paper shredder. Save these instructions for
later use.
• Follow all warnings and instructions marked
on the product!
• Make sure no liquid is spilled on or in the
●
paper shredder.
●
● • If the shredder is damaged or does not
function properly, switch the device off, pull
●
out the mains plug and inform our service
engineers.
• Keep paper shredder out of the reach of
children.
• This shredder should be operated only with
an operator in attendance.
Risk of injury by pulling in!
Keep long hair, loose articles of clothing,
ties, scarves, jewellery etc. away from feed
opening. Material with the tendency to form
loops, e.g. tapes, strapping material, etc.
must not be shredded.
english
Risk of injury!
Do not reach into the paper feed
slot.
Risk of injury from slivers!
Splinter protection from the
cross cut machines is only gu-
aranteed if the safety element
is covering the paper feed ope-
ning. Feed hard credit cards,
CDs, discs or DAT cassettes
only into the insertion slot.
9