Cleaning And Care; Technical Data; Ec Declaration Of Conformity - HSM Shredstar X10 Instrucciones De Servicio

7 Cleaning and care

Switch off the shredder and pull out the mains
plug.
When cleaning only use a soft cloth and a mild
soap-water solution. However, no water must
enter the equipment.
Oil the cutting unit when
cutting performance deterio-
rates or the device becomes
noisy, or every time you
empty the waste container.
• Squirt special cutting unit oil through the
paper feed across the entire width of the
cutting shafts.
• Without feeding in paper, run the cutting unit
in reverse (REV).
 This loosens paper dust and particles.

9 Technical data

Cutting type
Shred size (mm)
Sa fe ty ra ting German DIN 66399
Cutting ca pa ci ty DIN A4
Lo ading width
Cutting speed
Voltage
Power
Dimensions W x D x H (mm)
Weight
Volume of shred. mat. container
Noise level (Idle running)

EC Declaration of Conformity

HSM GmbH + Co. KG, Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the design and construction
of the supplied version of the machine HSM shredstar X10 meet the fundamental health and safety requirements of
the following EC directives:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards:
EN ISO 13857 EN 55014-1
EN 60950-1 EN 61000-3-2
Frickingen, 2.6.2014
10
P-4 / O-1 / T-2 / E-2 / F-1
80 g/m
2
EN 55014-2
EN 61000-3-3
ppa. Hubert Kötzinger - Chief Technical Offi cer (CTO)
shredstar X10
8 Disposal / Recycling
Electrical and electronic old devices
contain a variety of valuable materi-
als, but also hazardous substances
which were required for function and
safety. Incorrect disposal or handling
can be dangerous to your health and
the environment. Never dispose of old devices
in the household waste. Observe the current
applicable regulations and use the collection
points for returning and recycling electric and
electronic devices. Dispose of all the packaging
materials also in an environmentally-responsi-
ble way.
Cross cut
4 x 35 mm
10 sheet / 1 CD, DVD
224 mm
30 mm/s
230 V / 50 Hz
230 W
366 x 235 x 445
6.0 kg
21 l
58 dB(A)
english
06/2014