Assembly And Usage - Joovy Coo Manual De Instrucciones

Assembly and Usage

Playpen Mode
• Keep children away from playpen while unpacking and assembling.
• Open the travel bag and remove the playpen. The playpen comes fully assembled.
• Push both legs outward. (13) Ensure the legs lock into place by gently jiggling the legs. The joints
should be firmly engaged.
• Thread the four straps at the bottom of the bassinet fabric through the corresponding plastic rings
on the legs and secure the Velcro®. (14)
• The mattress comes first installed in bassinet mode (upper position).
• To install the mattress in playpen mode (lower position) after use in bassinet mode, release the
buckle on the mattress. (15) Unzip the mattress until it disengages from the bassinet. (16)
• Place the mattress at the bottom of the playpen.
• Locate the Velcro® straps near the corners of the mattress.
• Slide one corner strap through the slot in the floor of the playpen and secure to the underside of
the playpen. (17) Repeat for the other three corners.
NOTE: Make sure the storage zipper is completely closed in playpen mode.
I WARNING:
entanglement. Never use sheet unless it fits securely on mattress.
DO NOT use the rocking position when in playpen mode (lower position).
13
15
12
Prevent possible strangulation or
14
16