Joovy Qool Manual De Instrucciones página 28

Car Seat Adapters (Britax/B.O.B. B-Safe) (Optional)
• To use the car seat adapters in the rear (higher) or middle (lower) position, first ensure the stroller
seat is removed.
• Place the seat brackets at the desired height. Insert both car seat adapters into the seat brackets.
(54) Pull on the adapters to ensure they are secure. The car seat can be mounted forward-facing
or rear-facing.
• Hold the car seat by the carry handle and lower the car seat onto the stroller so that the hook on
the rear of the car seat latches onto the car seat adapters. (55) Pull up on car seat to ensure it is
secure.
• To remove the car seat, pull the release lever (the same lever used to release the car seat from its
base) and lift up.
• To remove the adapters from the stroller, squeeze upward on the side trigger for one adapter and
pull it off the stroller. (56) Repeat for other side.
• To use the car seat adapters in the front position, front adapters (sold separately) must be installed
prior to being able to install the car seat adapters. See the Front Adapters section for information
on installation.
• Place the car seat adapters onto both of the front adapters. (57) Pull on the adapters to ensure
they are secure. The car seat can be mounted forward-facing or rear-facing.
• Hold the car seat by the carry handle and lower the car seat onto the stroller so that the hook on
the rear of the car seat latches onto the car seat adapters. (58) Pull up on car seat to ensure it is
secure.
• To remove the car seat, pull the release lever (the same lever used to release the car seat from its
base) and lift up.
• To remove the adapters from the stroller, squeeze upward on the side trigger for one adapter and
pull it off the stroller. (56) Repeat for other side.
• Before folding, remove any infant car seat. The stroller can be folded with the infant car seat
adapter in place.
I WARNING:
ALWAYS position the infant car seat so that it securely snaps into place
into the infant car seat adapter. Always extend the handle to max. height
when using car seat in the upper rear position. The infant car seat adapter
is for use ONLY with specific car seats. DO NOT use other infant car seat
models that are not in the Car Seat Compatibility List (see below). This
product is not a toy. DO NOT allow children to play with it.
When using your stroller as an infant car seat, the following are the compatible infant car seat
Graco® SnugRide Click Connect 30
Graco® SnugRide Click Connect 35
Graco® SnugRide Click Connect 35 LX
Graco® SnugRide SnugLock 35 DLX
Graco® SnugRide Click Connect 40
Chicco® KeyFit
Chicco® KeyFit 30
28
For use ONLY on the Joovy Qool Stroller.
IMPORTANT NOTE
models that the Qool will accommodate:
For the most updated list of compatible infant car seats,
please check our website at www.joovy.com.
Chicco® KeyFit 30 Magic
Chicco® KeyFit 30 Zip
Chicco® KeyFit 30 Zip Air
Britax®/BOB® B-Safe
Britax® B-Safe 35
Britax® B-Safe 35 Elite